Server Info
apc_bat_charge[3%]
3%
apc_load[237.6/330 Watt]
72%
ra_memory[19.84/62.7 GB]
31%
Network Information
Database updated: 2026-05-06 11:35:00
enp4s0 since 2025-11-02
rx: 14.62 TiB tx: 6.37 TiB total: 20.99 TiB
monthly
rx | tx | total | avg. rate
------------------------+-------------+-------------+---------------
2026-04 2.34 TiB | 1.33 TiB | 3.68 TiB | 12.48 Mbit/s
2026-05 372.26 GiB | 139.71 GiB | 511.97 GiB | 9.28 Mbit/s
------------------------+-------------+-------------+---------------
estimated 2.06 TiB | 789.96 GiB | 2.83 TiB |
daily
rx | tx | total | avg. rate
------------------------+-------------+-------------+---------------
yesterday 69.36 GiB | 19.00 GiB | 88.36 GiB | 8.78 Mbit/s
today 35.36 GiB | 6.06 GiB | 41.42 GiB | 8.53 Mbit/s
------------------------+-------------+-------------+---------------
estimated 73.25 GiB | 12.56 GiB | 85.81 GiB |
free -h:
total used free shared buff/cache available
Mem: 62Gi 19Gi 599Mi 827Mi 43Gi 42Gi
Swap: 32Gi 5.7Gi 26Gi
df -h:
Filesystem Size Used Avail Use% Mounted on
/dev/nvme0n1p1 213G 177G 27G 88% /
udev 32G 0 32G 0% /dev
tmpfs 32G 4.3M 32G 1% /dev/shm
tmpfs 6.3G 5.6M 6.3G 1% /run
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 6.3G 0 6.3G 0% /run/user/1000
/dev/nvme0n1p3 113G 94G 14G 88% /media/files/nvm_150
/dev/nvme0n1p4 112G 51G 62G 46% /var/lib/jellyfin
/dev/md1 73T 43T 27T 62% /media/files/lvm
/sbin/apcaccess:
APC : 001,027,0663
DATE : 2026-05-06 11:36:03 +0200
HOSTNAME : GilchServer
VERSION : 3.14.14 (31 May 2016) debian
UPSNAME : server_usv
CABLE : USB Cable
DRIVER : USB UPS Driver
UPSMODE : Stand Alone
STARTTIME: 2026-05-02 10:29:17 +0200
MODEL : Smart-UPS 1500
STATUS : ONLINE
BCHARGE : 100.0 Percent
TIMELEFT : 72.0 Minutes
MBATTCHG : 60 Percent
MINTIMEL : 3 Minutes
MAXTIME : 0 Seconds
ALARMDEL : No alarm
BATTV : 27.0 Volts
NUMXFERS : 0
TONBATT : 0 Seconds
CUMONBATT: 0 Seconds
XOFFBATT : N/A
STATFLAG : 0x05000008
MANDATE : 2018-02-01
SERIALNO : AS1805331755
NOMBATTV : 24.0 Volts
FIRMWARE : UPS 09.3 / ID=18
END APC : 2026-05-06 11:36:06 +0200
Raid mdadm
Personalities : [raid6] [raid5] [raid4] [linear] [multipath] [raid0] [raid1] [raid10]
md1 : active raid6 sdd1[9] sdc1[12] sdf1[14] sdb1[7] sde1[10] sda1[11] sdg1[13]
78129077760 blocks super 1.2 level 6, 512k chunk, algorithm 2 [7/7] [UUUUUUU]
bitmap: 24/59 pages [96KB], 131072KB chunk
unused devices:
Wed May 6 11:36:01 AM CEST 2026
md0
md1
/dev/md1:
Version : 1.2
Creation Time : Fri Sep 29 19:09:26 2023
Raid Level : raid6
Array Size : 78129077760 (72.76 TiB 80.00 TB)
Used Dev Size : 15625815552 (14.55 TiB 16.00 TB)
Raid Devices : 7
Total Devices : 7
Persistence : Superblock is persistent
Intent Bitmap : Internal
Update Time : Wed May 6 11:34:52 2026
State : active
Active Devices : 7
Working Devices : 7
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 512K
Consistency Policy : bitmap
Name : GilchServer:1 (local to host GilchServer)
UUID : 36e2cc81:4416f70b:7e064b2b:1057d6c3
Events : 3276068
Number Major Minor RaidDevice State
14 8 81 0 active sync /dev/sdf1
13 8 97 1 active sync /dev/sdg1
12 8 33 2 active sync /dev/sdc1
10 8 65 3 active sync /dev/sde1
9 8 49 4 active sync /dev/sdd1
11 8 1 5 active sync /dev/sda1
7 8 17 6 active sync /dev/sdb1
Gpu Information
HDD Information
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 14.6T 0 disk
`-sda1 8:1 0 14.6T 0 part
`-md1 9:1 0 72.8T 0 raid6 /var/lib/docker/volumes/open-webui_openwebui-data/_data
/media/files/lvm
sdb 8:16 0 14.6T 0 disk
`-sdb1 8:17 0 14.6T 0 part
`-md1 9:1 0 72.8T 0 raid6 /var/lib/docker/volumes/open-webui_openwebui-data/_data
/media/files/lvm
sdc 8:32 0 14.6T 0 disk
`-sdc1 8:33 0 14.6T 0 part
`-md1 9:1 0 72.8T 0 raid6 /var/lib/docker/volumes/open-webui_openwebui-data/_data
/media/files/lvm
sdd 8:48 0 14.6T 0 disk
`-sdd1 8:49 0 14.6T 0 part
`-md1 9:1 0 72.8T 0 raid6 /var/lib/docker/volumes/open-webui_openwebui-data/_data
/media/files/lvm
sde 8:64 0 14.6T 0 disk
`-sde1 8:65 0 14.6T 0 part
`-md1 9:1 0 72.8T 0 raid6 /var/lib/docker/volumes/open-webui_openwebui-data/_data
/media/files/lvm
sdf 8:80 0 14.6T 0 disk
`-sdf1 8:81 0 14.6T 0 part
`-md1 9:1 0 72.8T 0 raid6 /var/lib/docker/volumes/open-webui_openwebui-data/_data
/media/files/lvm
sdg 8:96 0 14.6T 0 disk
`-sdg1 8:97 0 14.6T 0 part
`-md1 9:1 0 72.8T 0 raid6 /var/lib/docker/volumes/open-webui_openwebui-data/_data
/media/files/lvm
nvme0n1 259:0 0 476.9G 0 disk
|-nvme0n1p1 259:1 0 215.6G 0 part /var/tmp
| /tmp
| /
|-nvme0n1p2 259:2 0 32.4G 0 part [SWAP]
|-nvme0n1p3 259:3 0 115G 0 part /var/lib/docker/volumes/invoke_ai_invokeai-models/_data
| /var/lib/docker/volumes/invoke_ai_invokeai-cache/_data
| /var/lib/docker/volumes/invoke_ai_invokeai-data/_data
| /media/files/nvm_150
`-nvme0n1p4 259:4 0 113.7G 0 part /var/lib/jellyfin
Wed May 6 11:36:01 AM CEST 2026
sda
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
sdb
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
sdc
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
sdd
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
sde
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
sdf
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
sdg
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
sdh
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sdh [SAT] failed: No such device
sdi
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sdi [SAT] failed: No such device
nvme0
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
smart detail sda
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Exos X16
Device Model: ST16000NM001G-2KK103
Serial Number: ZL2J3N85
LU WWN Device Id: 5 000c50 0db743e73
Firmware Version: SN04
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed May 6 11:36:02 2026 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 245) Self-test routine in progress...
50% of test remaining.
Total time to complete Offline
data collection: ( 567) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: (1394) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 084 064 044 Pre-fail Always - 242665600
3 Spin_Up_Time 0x0003 090 090 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 88
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 121506791
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4673
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 88
18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 063 051 040 Old_age Always - 37 (Min/Max 28/38)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 82
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 241
194 Temperature_Celsius 0x0022 037 040 000 Old_age Always - 37 (0 24 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4669h+39m+37.073s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 67131584915
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 297988325680
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 50% 4673 -
# 2 Short offline Completed without error 00% 4613 -
# 3 Short offline Completed without error 00% 4607 -
# 4 Short offline Completed without error 00% 4601 -
# 5 Short offline Completed without error 00% 4595 -
# 6 Short offline Completed without error 00% 4589 -
# 7 Short offline Completed without error 00% 4583 -
# 8 Short offline Completed without error 00% 4577 -
# 9 Short offline Completed without error 00% 4571 -
#10 Short offline Completed without error 00% 4565 -
#11 Extended offline Completed without error 00% 4563 -
#12 Short offline Completed without error 00% 4469 -
#13 Short offline Completed without error 00% 4463 -
#14 Short offline Completed without error 00% 4457 -
#15 Short offline Completed without error 00% 4451 -
#16 Short offline Completed without error 00% 4445 -
#17 Short offline Completed without error 00% 4439 -
#18 Short offline Completed without error 00% 4433 -
#19 Short offline Completed without error 00% 4427 -
#20 Short offline Completed without error 00% 4421 -
#21 Extended offline Completed without error 00% 4417 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smart detail sdb
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST16000NM002C-3YG103
Serial Number: ZXA0H90R
LU WWN Device Id: 5 000c50 0e87571df
Firmware Version: SN04
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-5 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed May 6 11:36:02 2026 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: ( 567) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: (1414) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x50bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 077 064 044 Pre-fail Always - 54165188
3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 9
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 088 060 045 Pre-fail Always - 589327642
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3782
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 9
18 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 063 061 000 Old_age Always - 37 (Min/Max 27/39)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 129
194 Temperature_Celsius 0x0022 037 040 000 Old_age Always - 37 (0 27 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0
240 Head_Flying_Hours 0x0000 100 100 000 Old_age Offline - 3736 (146 182 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 58019427959
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 217492409846
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 90% 3726 -
# 2 Short offline Completed without error 00% 3722 -
# 3 Short offline Completed without error 00% 3716 -
# 4 Short offline Completed without error 00% 3710 -
# 5 Short offline Completed without error 00% 3704 -
# 6 Short offline Completed without error 00% 3698 -
# 7 Short offline Completed without error 00% 3692 -
# 8 Short offline Completed without error 00% 3686 -
# 9 Short offline Completed without error 00% 3680 -
#10 Short offline Completed without error 00% 3674 -
#11 Short offline Completed without error 00% 3668 -
#12 Short offline Completed without error 00% 3662 -
#13 Extended offline Completed without error 00% 3662 -
#14 Short offline Completed without error 00% 3578 -
#15 Short offline Completed without error 00% 3572 -
#16 Short offline Completed without error 00% 3566 -
#17 Short offline Completed without error 00% 3560 -
#18 Short offline Completed without error 00% 3554 -
#19 Short offline Completed without error 00% 3548 -
#20 Short offline Completed without error 00% 3542 -
#21 Short offline Completed without error 00% 3536 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smart detail sdc
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Exos X16
Device Model: ST16000NM001G-2KK103
Serial Number: WL209KAC
LU WWN Device Id: 5 000c50 0d66f4400
Firmware Version: SB30
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed May 6 11:36:02 2026 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 245) Self-test routine in progress...
50% of test remaining.
Total time to complete Offline
data collection: ( 567) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: (1401) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 081 064 044 Pre-fail Always - 115208563
3 Spin_Up_Time 0x0003 090 090 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 142
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 085 060 045 Pre-fail Always - 336126374
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6443
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 141
18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1
190 Airflow_Temperature_Cel 0x0022 064 061 040 Old_age Always - 36 (Min/Max 28/38)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 136
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 363
194 Temperature_Celsius 0x0022 036 040 000 Old_age Always - 36 (0 22 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 6439h+47m+55.609s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 87024555471
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 284562523705
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 50% 6443 -
# 2 Short offline Completed without error 00% 6383 -
# 3 Short offline Completed without error 00% 6377 -
# 4 Short offline Completed without error 00% 6371 -
# 5 Short offline Completed without error 00% 6365 -
# 6 Short offline Completed without error 00% 6359 -
# 7 Short offline Completed without error 00% 6353 -
# 8 Short offline Completed without error 00% 6347 -
# 9 Short offline Completed without error 00% 6341 -
#10 Short offline Completed without error 00% 6335 -
#11 Extended offline Completed without error 00% 6334 -
#12 Short offline Completed without error 00% 6239 -
#13 Short offline Completed without error 00% 6233 -
#14 Short offline Completed without error 00% 6227 -
#15 Short offline Completed without error 00% 6221 -
#16 Short offline Completed without error 00% 6215 -
#17 Short offline Completed without error 00% 6209 -
#18 Short offline Completed without error 00% 6203 -
#19 Short offline Completed without error 00% 6197 -
#20 Short offline Completed without error 00% 6191 -
#21 Extended offline Completed without error 00% 6190 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smart detail sdd
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba MG09ACA... Enterprise Capacity HDD
Device Model: TOSHIBA MG09ACA16TE
Serial Number: 95M2A08EFJKH
LU WWN Device Id: 5 000039 e48d3e2e0
Firmware Version: 0107
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed May 6 11:36:02 2026 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 247) Self-test routine in progress...
70% of test remaining.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1320) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 7746
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 7
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 3623
10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7
23 Helium_Condition_Lower 0x0023 100 100 075 Pre-fail Always - 0
24 Helium_Condition_Upper 0x0023 100 100 075 Pre-fail Always - 0
27 MAMR_Health_Monitor 0x0023 100 100 030 Pre-fail Always - 264745
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 93
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 7
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 35 (Min/Max 13/38)
196 Reallocated_Event_Count 0x0033 100 100 010 Pre-fail Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 1310720
222 Loaded_Hours 0x0032 091 091 000 Old_age Always - 3623
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 699
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 56395576093
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 194539761605
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3564 -
# 2 Short offline Completed without error 00% 3558 -
# 3 Short offline Completed without error 00% 3552 -
# 4 Short offline Completed without error 00% 3546 -
# 5 Short offline Completed without error 00% 3540 -
# 6 Short offline Completed without error 00% 3534 -
# 7 Short offline Completed without error 00% 3528 -
# 8 Extended offline Interrupted (host reset) 40% 3526 -
# 9 Short offline Completed without error 00% 3420 -
#10 Short offline Completed without error 00% 3414 -
#11 Short offline Completed without error 00% 3408 -
#12 Short offline Completed without error 00% 3402 -
#13 Short offline Completed without error 00% 3396 -
#14 Short offline Completed without error 00% 3390 -
#15 Short offline Completed without error 00% 3384 -
#16 Short offline Completed without error 00% 3378 -
#17 Short offline Completed without error 00% 3372 -
#18 Extended offline Completed without error 00% 3371 -
#19 Short offline Completed without error 00% 3204 -
#20 Short offline Completed without error 00% 3198 -
#21 Short offline Completed without error 00% 3192 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smart detail sde
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST16000VN001-2YU101
Serial Number: WRS0Y16R
LU WWN Device Id: 5 000c50 0f7ed8d71
Firmware Version: SC60
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed May 6 11:36:02 2026 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 246) Self-test routine in progress...
60% of test remaining.
Total time to complete Offline
data collection: ( 559) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: (1380) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x50bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 084 064 044 Pre-fail Always - 238157290
3 Spin_Up_Time 0x0003 088 088 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 157
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 045 Pre-fail Always - 66811863
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4725
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 163
18 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 063 061 000 Old_age Always - 37 (Min/Max 28/39)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 155
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 314
194 Temperature_Celsius 0x0022 037 040 000 Old_age Always - 37 (0 23 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0
240 Head_Flying_Hours 0x0000 100 100 000 Old_age Offline - 4722 (213 39 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 73486266527
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 298711178313
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 60% 4725 -
# 2 Short offline Completed without error 00% 4666 -
# 3 Short offline Completed without error 00% 4660 -
# 4 Short offline Completed without error 00% 4654 -
# 5 Short offline Completed without error 00% 4648 -
# 6 Short offline Completed without error 00% 4642 -
# 7 Short offline Completed without error 00% 4636 -
# 8 Short offline Completed without error 00% 4630 -
# 9 Extended offline Interrupted (host reset) 10% 4628 -
#10 Short offline Completed without error 00% 4522 -
#11 Short offline Completed without error 00% 4516 -
#12 Short offline Completed without error 00% 4510 -
#13 Short offline Completed without error 00% 4504 -
#14 Short offline Completed without error 00% 4498 -
#15 Short offline Completed without error 00% 4492 -
#16 Short offline Completed without error 00% 4486 -
#17 Extended offline Completed without error 00% 4485 -
#18 Short offline Completed without error 00% 4378 -
#19 Short offline Completed without error 00% 4372 -
#20 Short offline Completed without error 00% 4366 -
#21 Short offline Completed without error 00% 4360 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smart detail sdf
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST16000NM002C-3YG103
Serial Number: ZXA15SE0
LU WWN Device Id: 5 000c50 0e93187e8
Firmware Version: SN04
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-5 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed May 6 11:36:03 2026 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: ( 567) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: (1328) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x50bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 078 064 044 Pre-fail Always - 69452393
3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 9
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 088 060 045 Pre-fail Always - 579171701
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3827
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 9
18 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 063 000 Old_age Always - 36 (Min/Max 28/37)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 132
194 Temperature_Celsius 0x0022 036 040 000 Old_age Always - 36 (0 25 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0
240 Head_Flying_Hours 0x0000 100 100 000 Old_age Offline - 3781 (51 196 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 58523465112
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 237264612033
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 90% 3772 -
# 2 Short offline Completed without error 00% 3768 -
# 3 Short offline Completed without error 00% 3762 -
# 4 Short offline Completed without error 00% 3756 -
# 5 Short offline Completed without error 00% 3750 -
# 6 Short offline Completed without error 00% 3744 -
# 7 Short offline Completed without error 00% 3738 -
# 8 Short offline Completed without error 00% 3732 -
# 9 Extended offline Interrupted (host reset) 00% 3700 -
#10 Short offline Completed without error 00% 3696 -
#11 Short offline Completed without error 00% 3690 -
#12 Short offline Completed without error 00% 3684 -
#13 Short offline Completed without error 00% 3678 -
#14 Short offline Completed without error 00% 3672 -
#15 Short offline Completed without error 00% 3666 -
#16 Short offline Completed without error 00% 3660 -
#17 Short offline Completed without error 00% 3654 -
#18 Short offline Completed without error 00% 3648 -
#19 Short offline Completed without error 00% 3642 -
#20 Short offline Completed without error 00% 3636 -
#21 Short offline Completed without error 00% 3630 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smart detail sdg
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Exos X16
Device Model: ST16000NM001G-2KK103
Serial Number: ZL2F0V81
LU WWN Device Id: 5 000c50 0c92c1e1f
Firmware Version: SN04
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed May 6 11:36:03 2026 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 245) Self-test routine in progress...
50% of test remaining.
Total time to complete Offline
data collection: ( 559) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: (1414) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 084 064 044 Pre-fail Always - 224766996
3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 7
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 090 060 045 Pre-fail Always - 972311069
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4139
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 7
18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 063 049 040 Old_age Always - 37 (Min/Max 28/39)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 142
194 Temperature_Celsius 0x0022 037 040 000 Old_age Always - 37 (0 20 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4137h+01m+37.062s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 61347100683
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 260776894297
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 50% 4139 -
# 2 Short offline Completed without error 00% 4079 -
# 3 Short offline Completed without error 00% 4073 -
# 4 Short offline Completed without error 00% 4067 -
# 5 Short offline Completed without error 00% 4061 -
# 6 Short offline Completed without error 00% 4055 -
# 7 Short offline Completed without error 00% 4049 -
# 8 Short offline Completed without error 00% 4043 -
# 9 Short offline Completed without error 00% 4037 -
#10 Short offline Completed without error 00% 4031 -
#11 Extended offline Completed without error 00% 4031 -
#12 Short offline Completed without error 00% 3935 -
#13 Short offline Completed without error 00% 3929 -
#14 Short offline Completed without error 00% 3923 -
#15 Short offline Completed without error 00% 3917 -
#16 Short offline Completed without error 00% 3911 -
#17 Short offline Completed without error 00% 3905 -
#18 Short offline Completed without error 00% 3899 -
#19 Short offline Completed without error 00% 3893 -
#20 Short offline Completed without error 00% 3887 -
#21 Extended offline Completed without error 00% 3886 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smart detail sdh
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sdh failed: No such device
smart detail sdi
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sdi failed: No such device
smart detail nvme0
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-45-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: KINGSTON SKC3000S512G
Serial Number: 50026B7383BE8612
Firmware Version: EIFK31.7
PCI Vendor/Subsystem ID: 0x2646
IEEE OUI Identifier: 0x0026b7
Total NVM Capacity: 512,110,190,592 [512 GB]
Unallocated NVM Capacity: 0
Controller ID: 1
NVMe Version: 1.4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 512,110,190,592 [512 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 0026b7 383be86125
Local Time is: Wed May 6 11:36:03 2026 CEST
Firmware Updates (0x12): 1 Slot, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x08): Telmtry_Lg
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 84 Celsius
Critical Comp. Temp. Threshold: 89 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 8.80W - - 0 0 0 0 0 0
1 + 7.10W - - 1 1 1 1 0 0
2 + 5.20W - - 2 2 2 2 0 0
3 - 0.0620W - - 3 3 3 3 2500 7500
4 - 0.0620W - - 4 4 4 4 2500 7500
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 2
1 - 4096 0 1
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 38 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 5%
Data Units Read: 16,773,690 [8.58 TB]
Data Units Written: 43,654,132 [22.3 TB]
Host Read Commands: 195,684,932
Host Write Commands: 440,487,841
Controller Busy Time: 3,735
Power Cycles: 118
Power On Hours: 6,467
Unsafe Shutdowns: 100
Media and Data Integrity Errors: 0
Error Information Log Entries: 110
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 2: 67 Celsius
Error Information (NVMe Log 0x01, 16 of 63 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 110 0 0x001c 0x4004 0x028 0 0 -
1 109 0 0x1014 0x4004 - 0 0 -
Wed May 6 11:36:01 AM CEST 2026
memory usage
PID User Command Swap USS PSS RSS
5516 root /package/admin/s6/command/s 44.0K 4.0K 4.0K 8.0K
5913 root s6-supervise s6-linux-init- 12.0K 4.0K 4.0K 8.0K
5916 root /package/admin/s6-linux-ini 8.0K 4.0K 4.0K 8.0K
5956 root s6-supervise frigate-log 24.0K 4.0K 4.0K 8.0K
5957 root s6-supervise go2rtc-log 20.0K 4.0K 4.0K 8.0K
5958 root s6-supervise certsync-log 20.0K 4.0K 4.0K 8.0K
5959 root s6-supervise nginx-log 16.0K 4.0K 4.0K 8.0K
5960 root s6-supervise frigate 20.0K 4.0K 4.0K 8.0K
5961 root s6-supervise certsync 16.0K 4.0K 4.0K 8.0K
5962 root s6-supervise s6rc-oneshot-r 20.0K 4.0K 4.0K 8.0K
5963 root s6-supervise s6rc-fdholder 16.0K 4.0K 4.0K 8.0K
5964 root s6-supervise go2rtc-healthc 16.0K 4.0K 4.0K 8.0K
5965 root s6-supervise nginx 20.0K 4.0K 4.0K 8.0K
5966 root s6-supervise go2rtc 20.0K 4.0K 4.0K 8.0K
5977 root /package/admin/s6/command/s 16.0K 4.0K 4.0K 8.0K
5978 root /package/admin/s6-2.13.2.0/ 48.0K 4.0K 4.0K 8.0K
6550 root /package/admin/s6/command/s 36.0K 4.0K 4.0K 8.0K
8743 root s6-supervise s6-linux-init- 16.0K 4.0K 4.0K 8.0K
8748 root /package/admin/s6-linux-ini 4.0K 4.0K 4.0K 8.0K
8885 root s6-supervise s6rc-oneshot-r 16.0K 4.0K 4.0K 8.0K
8886 root s6-supervise s6rc-fdholder 8.0K 4.0K 4.0K 8.0K
8899 root /package/admin/s6/command/s 16.0K 4.0K 4.0K 8.0K
8936 root s6-supervise home-assistant 20.0K 4.0K 4.0K 8.0K
7592 root /package/admin/s6-linux-ini 0 12.0K 12.0K 16.0K
7621 root s6-supervise s6rc-fdholder 0 16.0K 16.0K 20.0K
6064 nobody s6-log -b -- T 1 n0 s100000 20.0K 4.0K 19.0K 76.0K
12206 root nginx: master process nginx 1.4M 4.0K 19.0K 772.0K
7622 root s6-supervise svc-cron 0 20.0K 20.0K 24.0K
7623 root s6-supervise svc-nginx 0 20.0K 20.0K 24.0K
7589 root s6-supervise s6-linux-init- 0 24.0K 24.0K 28.0K
7619 root s6-supervise s6rc-oneshot-r 0 24.0K 24.0K 28.0K
7620 root s6-supervise svc-php-fpm 0 24.0K 24.0K 28.0K
7636 root /package/admin/s6/command/s 0 28.0K 28.0K 32.0K
5337 root /usr/bin/dumb-init node ser 0 28.0K 32.0K 36.0K
6062 nobody s6-log -b -- T 1 n0 s100000 0 28.0K 43.0K 100.0K
5511 root /package/admin/s6/command/s 0 48.0K 48.0K 52.0K
6013 rootgilch /bin/bash ./entrypoint.sh 216.0K 24.0K 52.0K 564.0K
6063 nobody s6-log -b -- T 1 n0 s100000 0 28.0K 61.0K 136.0K
2808500 root /sbin/tini -- node index.js 4.0K 40.0K 62.0K 528.0K
6556 root /bin/tini -- ./run.sh 68.0K 36.0K 66.0K 1.2M
1450 nobody /usr/sbin/sslh --foreground 0 28.0K 79.0K 532.0K
1584 rabbitmq erl_child_setup 65536 36.0K 76.0K 82.0K 1.4M
6065 nobody s6-log -b -- T 1 n0 s100000 0 52.0K 85.0K 160.0K
5329 rootgilch /bin/tini -- /usr/local/bin 64.0K 32.0K 109.0K 344.0K
4416 rabbitmq /bin/sh -s rabbit_disk_moni 0 104.0K 119.0K 1.6M
2550 rabbitmq /usr/lib/erlang/erts-13.1.5 0 72.0K 127.0K 1.5M
2552 rabbitmq /usr/lib/erlang/erts-13.1.5 0 76.0K 132.0K 1.6M
9983 rootgilch /usr/share/elasticsearch/mo 2.7M 4.0K 132.0K 476.0K
2550182 root /bin/sh -c sh /etc/cron.hou 0 108.0K 146.0K 1.6M
2550179 root /bin/sh -c /bin/bash /etc/c 0 108.0K 148.0K 1.7M
1154 root /usr/sbin/cron -f 92.0K 108.0K 149.0K 2.5M
2550191 root sh /etc/cron.hourly/ramchec 0 112.0K 150.0K 1.7M
2549175 root sleep 60 0 96.0K 161.0K 1.3M
12208 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12210 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12216 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12217 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12218 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12219 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12221 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12222 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12226 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12229 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12231 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12232 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12234 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12235 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12236 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
12237 root nginx: worker process 1.6M 128.0K 172.0K 2.2M
2549758 root sleep 30s 0 100.0K 173.0K 1.4M
12215 root nginx: worker process 1.6M 132.0K 176.0K 2.2M
12233 root nginx: worker process 1.6M 132.0K 176.0K 2.2M
12225 root nginx: worker process 1.7M 132.0K 178.0K 2.2M
9551 root nginx: master process nginx 0 132.0K 179.0K 1.5M
2409034 root sleep 3600 0 140.0K 179.0K 1.5M
12230 root nginx: worker process 1.6M 136.0K 180.0K 2.2M
12224 root nginx: worker process 1.6M 128.0K 185.0K 2.3M
1446 nobody /usr/sbin/sslh --foreground 0 92.0K 188.0K 2.5M
12223 root nginx: worker process 1.6M 148.0K 192.0K 2.3M
12228 root nginx: worker process 1.6M 148.0K 192.0K 2.3M
12227 root nginx: worker process 1.6M 160.0K 204.0K 2.3M
12213 root nginx: worker process 1.6M 168.0K 212.0K 2.3M
12214 root nginx: worker process 1.6M 168.0K 212.0K 2.3M
12220 root nginx: worker process 1.6M 168.0K 212.0K 2.3M
8041 root /bin/bash ./run.sh 300.0K 4.0K 214.0K 2.0M
12207 root nginx: worker process 1.6M 172.0K 216.0K 2.3M
12209 root nginx: worker process 1.6M 172.0K 216.0K 2.3M
12211 root nginx: worker process 1.6M 172.0K 216.0K 2.3M
12212 root nginx: worker process 1.6M 172.0K 216.0K 2.3M
12238 root nginx: worker process 1.6M 172.0K 216.0K 2.3M
1473 root /sbin/agetty -o -p -- \u -- 0 236.0K 254.0K 1.8M
1549452 nobody /usr/sbin/sslh --foreground 0 212.0K 262.0K 2.3M
2189296 nobody /usr/sbin/sslh --foreground 0 212.0K 263.0K 2.3M
3562769 nobody /usr/sbin/sslh --foreground 0 212.0K 263.0K 2.3M
12240 root /usr/local/bin/python -c fr 6.0M 4.0K 312.0K 4.4M
1278286 nobody /usr/sbin/sslh --foreground 0 240.0K 335.0K 2.4M
7127 root nginx: cache manager proces 5.2M 84.0K 338.0K 2.6M
2550195 root /bin/bash /etc/cron.d/smart 0 124.0K 388.0K 3.2M
12995 root busybox crond -f -S -l 5 0 396.0K 448.0K 912.0K
2550172 root /usr/sbin/CRON -f 36.0K 364.0K 450.0K 3.2M
2550176 root /usr/sbin/CRON -f 36.0K 360.0K 450.0K 3.3M
2029175 root sudo su 0 116.0K 491.0K 2.0M
8789 rootgilch nginx: worker process 0 448.0K 494.0K 2.1M
8775 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8777 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8778 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8779 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8780 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8781 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8782 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8783 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8784 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8785 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8786 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8787 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8788 rootgilch nginx: worker process 0 460.0K 504.0K 2.3M
8768 rootgilch nginx: worker process 0 464.0K 508.0K 2.3M
8769 rootgilch nginx: worker process 0 464.0K 508.0K 2.3M
8770 rootgilch nginx: worker process 0 464.0K 508.0K 2.3M
8771 rootgilch nginx: worker process 0 464.0K 508.0K 2.3M
8772 rootgilch nginx: worker process 0 464.0K 508.0K 2.3M
8773 rootgilch nginx: worker process 0 464.0K 508.0K 2.3M
8774 rootgilch nginx: worker process 0 464.0K 508.0K 2.3M
12202 root /bin/bash ./beat_auto_spawn 124.0K 300.0K 515.0K 2.3M
6558 rootgilch /bin/bash /usr/local/bin/ng 0 404.0K 528.0K 2.1M
6187 root bash ./run.user go2rtc-heal 136.0K 132.0K 596.0K 2.5M
8755 rootgilch nginx: worker process 0 504.0K 630.0K 3.4M
8757 rootgilch nginx: worker process 0 504.0K 630.0K 3.4M
8762 rootgilch nginx: worker process 0 504.0K 630.0K 3.4M
8763 rootgilch nginx: worker process 0 504.0K 630.0K 3.4M
9560 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9561 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9562 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9564 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9565 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9566 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9567 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9568 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9569 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9570 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9571 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9572 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9573 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9575 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9576 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9577 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9578 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9579 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9582 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9583 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9584 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9585 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9586 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9587 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9589 systemd-timesync nginx: worker process 0 600.0K 633.0K 1.9M
9581 systemd-timesync nginx: worker process 0 604.0K 637.0K 1.9M
9556 systemd-timesync nginx: worker process 0 608.0K 641.0K 1.9M
9557 systemd-timesync nginx: worker process 0 608.0K 641.0K 1.9M
9558 systemd-timesync nginx: worker process 0 608.0K 641.0K 1.9M
9554 systemd-timesync nginx: worker process 0 612.0K 645.0K 1.9M
9555 systemd-timesync nginx: worker process 0 612.0K 645.0K 1.9M
2029176 root su 0 532.0K 648.0K 4.0M
13035 911 nginx: worker process 0 608.0K 658.0K 2.5M
13036 911 nginx: worker process 0 608.0K 658.0K 2.5M
13037 911 nginx: worker process 0 608.0K 658.0K 2.5M
13038 911 nginx: worker process 0 608.0K 658.0K 2.5M
13039 911 nginx: worker process 0 608.0K 658.0K 2.5M
13040 911 nginx: worker process 0 608.0K 658.0K 2.5M
13041 911 nginx: worker process 0 608.0K 658.0K 2.5M
13042 911 nginx: worker process 0 608.0K 658.0K 2.5M
13043 911 nginx: worker process 0 608.0K 658.0K 2.5M
13044 911 nginx: worker process 0 608.0K 658.0K 2.5M
13045 911 nginx: worker process 0 608.0K 658.0K 2.5M
13046 911 nginx: worker process 0 608.0K 658.0K 2.5M
13047 911 nginx: worker process 0 608.0K 658.0K 2.5M
13048 911 nginx: worker process 0 608.0K 658.0K 2.5M
13049 911 nginx: worker process 0 608.0K 658.0K 2.5M
13050 911 nginx: worker process 0 608.0K 658.0K 2.5M
13051 911 nginx: worker process 0 608.0K 658.0K 2.5M
13052 911 nginx: worker process 0 608.0K 658.0K 2.5M
13053 911 nginx: worker process 0 608.0K 658.0K 2.5M
13054 911 nginx: worker process 0 608.0K 658.0K 2.5M
13055 911 nginx: worker process 0 608.0K 658.0K 2.5M
13056 911 nginx: worker process 0 608.0K 658.0K 2.5M
13057 911 nginx: worker process 0 608.0K 658.0K 2.5M
13058 911 nginx: worker process 0 608.0K 658.0K 2.5M
13059 911 nginx: worker process 0 608.0K 658.0K 2.5M
13060 911 nginx: worker process 0 608.0K 658.0K 2.5M
13061 911 nginx: worker process 0 608.0K 658.0K 2.5M
13062 911 nginx: worker process 0 608.0K 658.0K 2.5M
13031 911 nginx: worker process 0 612.0K 662.0K 2.5M
13032 911 nginx: worker process 0 612.0K 662.0K 2.5M
13033 911 nginx: worker process 0 612.0K 662.0K 2.5M
13034 911 nginx: worker process 0 612.0K 662.0K 2.5M
8166 root bash ./run.user certsync 128.0K 196.0K 664.0K 2.6M
1458 root /sbin/apcupsd 0 676.0K 685.0K 2.2M
9031 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9032 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9033 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9034 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9035 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9036 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9037 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9038 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9039 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9040 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9041 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9042 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9043 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9044 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9045 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9046 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9047 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9048 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9049 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9050 systemd-timesync nginx: worker process 0 652.0K 714.0K 3.0M
9018 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9019 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9020 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9022 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9023 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9024 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9025 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9026 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9027 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9028 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9029 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9030 systemd-timesync nginx: worker process 0 656.0K 718.0K 3.0M
9559 systemd-timesync nginx: worker process 0 688.0K 721.0K 2.0M
1092 root /sbin/mdadm --monitor --sca 0 716.0K 724.0K 2.1M
8704 rootgilch nginx: master process nginx 0 204.0K 727.0K 5.3M
1715 postgres postgres: 18/main: io worke 0 296.0K 740.0K 5.7M
1734 postgres postgres: 13/main: stats co 0 256.0K 788.0K 5.3M
2029177 root bash 0 620.0K 801.0K 3.8M
1430907 rootgilch /usr/bin/dbus-daemon --sess 0 488.0K 826.0K 4.5M
5652 root nginx: master process nginx 0 192.0K 842.0K 4.6M
1695 postgres postgres: 15/main: backgrou 0 296.0K 908.0K 5.3M
1714 postgres postgres: 18/main: io worke 0 384.0K 920.0K 6.2M
1707 postgres postgres: 15/main: walwrite 0 296.0K 921.0K 5.4M
8759 rootgilch nginx: worker process 0 824.0K 950.0K 3.7M
1278497 rootgilch SCREEN 0 936.0K 956.0K 2.2M
8764 rootgilch nginx: worker process 0 844.0K 961.0K 3.7M
12994 root nginx: master process /usr/ 0 212.0K 1.1M 4.9M
6194 root nginx: master process nginx 5.1M 4.0K 1.1M 7.3M
1728 postgres postgres: 13/main: backgrou 0 244.0K 1.1M 6.6M
1717 postgres postgres: 18/main: backgrou 0 320.0K 1.2M 7.0M
1694 postgres postgres: 15/main: checkpoi 0 388.0K 1.2M 6.5M
2029174 root sudo su 0 748.0K 1.2M 4.8M
1817 root /usr/sbin/smbd --foreground 0 208.0K 1.2M 5.2M
1449 vnstat /usr/sbin/vnstatd -n 0 708.0K 1.2M 3.7M
8761 rootgilch nginx: worker process 0 1.1M 1.3M 4.1M
8765 rootgilch nginx: worker process 0 1.1M 1.3M 4.1M
2044305 www-data /usr/sbin/apache2 -k start 152.0K 940.0K 1.3M 7.3M
1708 postgres postgres: 16/main: backgrou 0 300.0K 1.3M 6.7M
8756 rootgilch nginx: worker process 0 1.2M 1.3M 4.1M
8760 rootgilch nginx: worker process 0 1.2M 1.3M 4.1M
8767 rootgilch nginx: worker process 0 1.2M 1.3M 4.1M
1712 postgres postgres: 18/main: io worke 0 892.0K 1.5M 6.9M
3562777 rootgilch sshd: rootgilch@pts/5 0 608.0K 1.5M 6.8M
1726 postgres postgres: 13/main: checkpoi 0 360.0K 1.5M 7.7M
1278296 rootgilch sshd: rootgilch@pts/1 0 652.0K 1.5M 6.7M
1188 root /lib/systemd/systemd-machin 0 1.1M 1.5M 6.8M
1278287 root sshd: rootgilch [priv] 0 392.0K 1.5M 10.8M
1549453 root sshd: rootgilch [priv] 0 396.0K 1.5M 11.0M
7115 root nginx: worker process 5.4M 544.0K 1.5M 7.6M
7112 root nginx: worker process 5.4M 548.0K 1.5M 7.7M
1716 postgres postgres: 18/main: checkpoi 0 412.0K 1.6M 8.8M
3562770 root sshd: rootgilch [priv] 0 424.0K 1.6M 11.0M
1814 root /usr/sbin/smbd --foreground 0 284.0K 1.6M 7.2M
1711 postgres postgres: 15/main: logical 0 552.0K 1.6M 6.9M
2189297 root sshd: rootgilch [priv] 0 428.0K 1.6M 11.1M
1087 systemd-timesync /lib/systemd/systemd-timesy 0 1.2M 1.6M 7.0M
1706 postgres postgres: 16/main: checkpoi 0 364.0K 1.6M 8.1M
1471 root sshd: /usr/sbin/sshd -D [li 0 1.4M 1.6M 7.6M
1735 postgres postgres: 13/main: logical 0 504.0K 1.6M 7.3M
2319335 root su -g motion motion -s /bin 0 920.0K 1.7M 3.3M
1739 postgres postgres: 18/main: logical 0 584.0K 1.7M 8.2M
1724 postgres postgres: 16/main: logical 0 560.0K 1.8M 7.7M
1709 postgres postgres: 15/main: autovacu 0 656.0K 1.8M 7.4M
1155 messagebus /usr/bin/dbus-daemon --syst 0 1.5M 1.8M 5.2M
7111 root nginx: worker process 5.2M 604.0K 1.8M 8.2M
1581 postgres /usr/lib/postgresql/15/bin/ 0 616.0K 1.8M 12.9M
1186 root /lib/systemd/systemd-logind 0 1.5M 1.9M 7.4M
1462 dnsmasq /usr/sbin/dnsmasq -x /run/d 0 1.8M 1.9M 3.4M
1738 postgres postgres: 18/main: autovacu 0 688.0K 2.0M 8.9M
1732 postgres postgres: 13/main: autovacu 0 664.0K 2.1M 8.3M
1549480 rootgilch -bash 0 1.9M 2.1M 5.0M
1278297 rootgilch -bash 0 1.9M 2.1M 5.1M
8110 root /usr/bin/docker-proxy -prot 4.7M 2.0M 2.1M 4.6M
1723 postgres postgres: 16/main: autovacu 0 672.0K 2.1M 8.3M
3562778 rootgilch -bash 0 1.9M 2.1M 5.1M
2189314 rootgilch -bash 0 1.9M 2.1M 5.2M
7110 root nginx: worker process 5.2M 868.0K 2.1M 8.5M
1278498 rootgilch /bin/bash 0 2.0M 2.2M 5.4M
1180 root /usr/sbin/smartd -n 0 2.2M 2.3M 6.0M
2476 epmd /usr/bin/epmd -systemd 0 2.3M 2.4M 4.8M
1737 postgres postgres: 18/main: walwrite 0 324.0K 2.8M 10.1M
1729 postgres postgres: 13/main: walwrite 0 244.0K 2.8M 9.6M
12297 root /usr/local/bin/python3.13 / 73.5M 0 2.8M 16.3M
653 root /lib/systemd/systemd-udevd 0 2.9M 2.9M 5.9M
1722 postgres postgres: 16/main: walwrite 0 300.0K 2.9M 9.6M
1217617 polkitd /usr/lib/polkit-1/polkitd - 0 2.7M 3.0M 6.8M
2189313 rootgilch sshd: rootgilch@pts/4 0 2.2M 3.0M 8.3M
1549479 rootgilch sshd: rootgilch@pts/0 0 2.5M 3.3M 8.6M
12296 root /usr/local/bin/python3.13 / 70.7M 0 3.7M 18.9M
8986 root php-fpm: master process (/e 636.0K 2.4M 3.8M 7.0M
9309 rootgilch /lib/systemd/systemd --user 0 2.7M 3.8M 10.1M
12203 root python backend_start.py 11.7M 3.2M 3.9M 10.4M
1174 root /usr/sbin/rsyslogd -n -iNON 0 4.0M 4.0M 6.7M
7400 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.5M
8011 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.5M
7332 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.6M
7870 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.6M
7923 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.6M
7967 root /usr/bin/docker-proxy -prot 2.7M 4.0M 4.1M 6.6M
7435 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.6M
7803 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.6M
7821 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.6M
7913 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.6M
7474 root /usr/bin/docker-proxy -prot 2.7M 4.0M 4.1M 6.6M
8052 root /usr/bin/docker-proxy -prot 2.7M 4.0M 4.1M 6.7M
8366 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.6M
7340 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.7M
8228 root /usr/bin/docker-proxy -prot 2.7M 4.0M 4.1M 6.6M
2808595 root /usr/bin/docker-proxy -prot 4.7M 4.0M 4.1M 6.6M
2808603 root /usr/bin/docker-proxy -prot 684.0K 4.0M 4.1M 6.7M
7294 root /usr/bin/docker-proxy -prot 2.7M 4.0M 4.1M 6.6M
8116 root /usr/bin/docker-proxy -prot 2.7M 4.0M 4.1M 6.7M
7301 root /usr/bin/docker-proxy -prot 2.7M 4.0M 4.1M 6.7M
2013888 www-data php-fpm: pool www 0 220.0K 4.1M 16.2M
2013889 www-data php-fpm: pool www 0 220.0K 4.1M 16.2M
9310 rootgilch (sd-pam) 0 3.4M 4.1M 6.1M
1671 root /usr/sbin/nmbd --foreground 0 2.8M 4.2M 11.6M
1767 root /usr/sbin/smbd --foreground 0 880.0K 4.2M 16.5M
637 root /lib/systemd/systemd-journa 0 4.1M 4.5M 10.0M
2319312 root /usr/bin/containerd-shim-ru 0 4.3M 4.6M 11.3M
8005 root /usr/bin/docker-proxy -prot 4.2M 4.6M 4.6M 7.3M
2319432 root /usr/bin/docker-proxy -prot 0 4.8M 4.9M 8.3M
2319440 root /usr/bin/docker-proxy -prot 0 4.8M 4.9M 8.4M
2319563 root /usr/bin/docker-proxy -prot 0 4.8M 4.9M 8.3M
2319517 root /usr/bin/docker-proxy -prot 0 4.8M 4.9M 8.4M
735282 root /usr/sbin/smbd --foreground 0 2.9M 5.6M 15.2M
5051 root /usr/bin/containerd-shim-ru 72.0K 5.5M 5.7M 12.3M
5753 root /usr/bin/containerd-shim-ru 1.5M 5.5M 5.8M 12.4M
6158 root /usr/bin/containerd-shim-ru 72.0K 5.5M 5.8M 12.3M
6279 root /usr/bin/containerd-shim-ru 1.6M 5.6M 5.8M 12.3M
6286 root /usr/bin/containerd-shim-ru 96.0K 5.6M 5.8M 12.4M
5367 root /usr/bin/containerd-shim-ru 1.1M 5.6M 5.8M 12.5M
5427 1883 /usr/sbin/mosquitto -c /mos 0 5.5M 5.9M 7.4M
5045 root /usr/bin/containerd-shim-ru 1.5M 5.7M 5.9M 12.5M
1600008 root php-fpm: master process (/e 0 3.0M 6.0M 12.7M
7406 root /usr/bin/docker-proxy -prot 2.7M 6.0M 6.1M 8.7M
7466 root /usr/bin/docker-proxy -prot 716.0K 6.0M 6.1M 8.6M
7524 root /usr/bin/docker-proxy -prot 2.7M 6.0M 6.1M 8.6M
7758 root /usr/bin/docker-proxy -prot 2.7M 6.0M 6.1M 8.6M
8065 root /usr/bin/docker-proxy -prot 2.7M 6.0M 6.1M 8.6M
8221 root /usr/bin/docker-proxy -prot 2.7M 6.0M 6.1M 8.7M
8378 root /usr/bin/docker-proxy -prot 2.7M 6.0M 6.1M 8.6M
8288 root /usr/bin/docker-proxy -prot 700.0K 6.0M 6.1M 8.6M
7769 root /usr/bin/docker-proxy -prot 2.7M 6.0M 6.1M 8.7M
8583 root /usr/bin/docker-proxy -prot 2.6M 6.0M 6.1M 8.7M
7441 root /usr/bin/docker-proxy -prot 4.7M 6.0M 6.1M 8.6M
7876 root /usr/bin/docker-proxy -prot 2.7M 6.0M 6.1M 8.6M
6105 root /usr/bin/containerd-shim-ru 1.5M 5.9M 6.1M 12.7M
5593 root /usr/bin/containerd-shim-ru 1.6M 5.9M 6.1M 12.7M
5444 root /usr/bin/containerd-shim-ru 1.5M 5.9M 6.1M 12.7M
7513 root /usr/bin/docker-proxy -prot 2.6M 6.1M 6.2M 8.8M
8575 root /usr/bin/docker-proxy -prot 2.5M 6.2M 6.3M 8.9M
6480 root /usr/bin/containerd-shim-ru 60.0K 6.1M 6.3M 12.9M
2808474 root /usr/bin/containerd-shim-ru 60.0K 6.1M 6.4M 13.0M
5466 root /usr/bin/containerd-shim-ru 80.0K 6.2M 6.4M 13.1M
6150 root /usr/bin/containerd-shim-ru 64.0K 6.2M 6.4M 13.0M
5590 root /usr/bin/containerd-shim-ru 48.0K 6.3M 6.5M 13.1M
6287 root /usr/bin/containerd-shim-ru 64.0K 6.3M 6.5M 13.2M
5385 root /usr/bin/containerd-shim-ru 44.0K 6.5M 6.7M 13.3M
6481 root /usr/bin/containerd-shim-ru 80.0K 6.5M 6.7M 13.3M
5047 root /usr/bin/containerd-shim-ru 2.1M 6.5M 6.7M 13.3M
5061 root /usr/bin/containerd-shim-ru 64.0K 6.5M 6.7M 13.3M
1 root /sbin/init 0 5.1M 6.8M 13.7M
5065 root /usr/bin/containerd-shim-ru 72.0K 6.5M 6.8M 13.4M
2319533 root /usr/bin/docker-proxy -prot 0 6.8M 6.9M 10.2M
2319556 root /usr/bin/docker-proxy -prot 0 6.8M 6.9M 10.4M
2319541 root /usr/bin/docker-proxy -prot 0 6.8M 6.9M 10.3M
2319478 root /usr/bin/docker-proxy -prot 0 6.8M 6.9M 10.3M
2319454 root /usr/bin/docker-proxy -prot 0 6.8M 6.9M 10.2M
2319509 root /usr/bin/docker-proxy -prot 0 6.8M 6.9M 10.4M
2319461 root /usr/bin/docker-proxy -prot 0 6.8M 6.9M 10.4M
2319485 root /usr/bin/docker-proxy -prot 0 6.8M 6.9M 10.4M
6283 root /usr/bin/containerd-shim-ru 64.0K 6.7M 6.9M 13.5M
5062 root /usr/bin/containerd-shim-ru 72.0K 6.7M 6.9M 13.5M
6281 root /usr/bin/containerd-shim-ru 60.0K 6.7M 7.0M 13.5M
5053 root /usr/bin/containerd-shim-ru 72.0K 6.9M 7.1M 13.7M
5058 root /usr/bin/containerd-shim-ru 64.0K 6.9M 7.2M 13.8M
6067 root /usr/bin/containerd-shim-ru 64.0K 7.1M 7.3M 13.9M
6478 root /usr/bin/containerd-shim-ru 64.0K 7.1M 7.3M 13.9M
5929 root /usr/bin/containerd-shim-ru 64.0K 7.2M 7.4M 14.0M
5883 root /usr/bin/containerd-shim-ru 76.0K 7.3M 7.5M 14.1M
869627 nobody php-fpm: pool www 600.0K 4.9M 8.0M 13.9M
871152 nobody php-fpm: pool www 600.0K 4.9M 8.0M 13.9M
6169 root /usr/bin/containerd-shim-ru 48.0K 7.9M 8.1M 14.8M
8278 root /usr/bin/docker-proxy -prot 2.5M 8.3M 8.4M 11.0M
9550 root php /listener.php 0 8.8M 8.9M 9.1M
1580 postgres /usr/lib/postgresql/16/bin/ 0 5.3M 9.1M 23.6M
1582 postgres /usr/lib/postgresql/13/bin/ 0 5.6M 9.4M 23.9M
6541 influxdb redis-server *:6379 0 8.2M 10.8M 13.5M
1600019 911 php-fpm: pool www 0 7.3M 11.0M 18.6M
9715 root python3 -u -m frigate 105.8M 4.6M 11.3M 73.1M
9552 root php-fpm: master process (/u 0 11.4M 11.4M 11.6M
1583 postgres /usr/lib/postgresql/18/bin/ 0 7.6M 11.5M 26.4M
1600020 911 php-fpm: pool www 0 8.2M 11.9M 19.5M
7973 root /usr/bin/docker-proxy -prot 1.4M 12.2M 12.2M 15.3M
10820 root /bin/go2rtc -c /tmp/go2rtc- 52.0K 14.7M 14.7M 14.7M
5273 influxdb redis-server *:6379 0 14.8M 14.8M 14.8M
2013887 root php-fpm: master process (/e 0 9.1M 15.3M 36.9M
2547555 www-data /usr/sbin/apache2 -k start 140.0K 8.5M 16.1M 96.0M
12298 root /usr/local/bin/python3.13 / 63.9M 13.5M 16.4M 32.1M
7885 rootgilch /usr/share/elasticsearch/jd 88.9M 13.4M 16.7M 20.2M
2542382 www-data /usr/sbin/apache2 -k start 140.0K 8.4M 17.3M 107.6M
10141 root frigate.detector.coral 185.3M 7.9M 17.4M 104.8M
1441 redis /usr/bin/redis-server 127.0 0 17.4M 17.8M 23.2M
7867 root node server.js 0 17.9M 17.9M 17.9M
6011 root /usr/bin/python3 /usr/bin/s 0 18.0M 18.0M 18.2M
2514367 www-data /usr/sbin/apache2 -k start 140.0K 8.5M 18.2M 114.2M
2527177 www-data /usr/sbin/apache2 -k start 140.0K 8.6M 18.2M 113.4M
2475918 www-data /usr/sbin/apache2 -k start 140.0K 8.6M 19.1M 118.5M
2475916 www-data /usr/sbin/apache2 -k start 140.0K 9.0M 20.8M 123.5M
2044304 root /usr/sbin/apache2 -k start 140.0K 10.5M 22.1M 78.5M
6544 influxdb redis-server *:6379 0 20.1M 22.8M 25.5M
1432 ollama /usr/local/bin/ollama serve 0 23.3M 23.4M 26.2M
2550203 root /usr/bin/python3 /usr/bin/s 0 22.3M 23.9M 27.9M
2145114 www-data /usr/sbin/apache2 -k start 140.0K 9.2M 23.9M 132.3M
5283 root /bin/ollama serve 0 24.0M 24.0M 24.0M
2203512 www-data /usr/sbin/apache2 -k start 140.0K 11.0M 26.4M 138.0M
2203494 www-data /usr/sbin/apache2 -k start 140.0K 11.1M 27.0M 140.0M
6704 rootgilch node /home/frappe/frappe-be 0 27.2M 27.3M 29.2M
10932 root frigate.capture:cam_einfahr 219.7M 16.8M 27.6M 121.2M
1163 prometheus /usr/bin/prometheus-node-ex 0 28.3M 28.3M 29.6M
10922 root frigate.capture:cam_carport 221.8M 18.6M 29.5M 123.0M
10945 root frigate.capture:cam_terasse 217.4M 19.4M 30.2M 123.7M
5321 root /portainer 12.0K 30.7M 30.7M 30.7M
2145111 www-data /usr/sbin/apache2 -k start 140.0K 11.1M 31.0M 145.8M
1413 root /usr/bin/python3 /usr/bin/f 16.0K 33.2M 35.4M 41.7M
2319703 root /usr/bin/python3 /usr/local 2.1M 6.4M 36.9M 67.9M
5300 influxdb mariadbd 174.0M 40.3M 40.3M 40.3M
6179 root /usr/local/go2rtc/bin/go2rt 3.3M 41.1M 41.1M 41.1M
2014384 root /usr/local/bin/python3.13 / 5.4M 8.2M 41.5M 86.5M
12201 root /usr/local/bin/python3.13 / 5.4M 8.1M 42.3M 93.5M
6553 rootgilch /home/frappe/frappe-bench/e 3.1M 21.8M 42.8M 87.1M
1168 prometheus /usr/bin/prometheus-pushgat 200.0K 46.9M 46.9M 48.0M
5320 rootgilch /app/navidrome 44.0K 50.5M 50.5M 50.5M
1452 root /usr/bin/containerd 3.0M 51.3M 51.3M 52.6M
6702 rootgilch /home/frappe/frappe-bench/e 132.0K 51.1M 52.5M 59.5M
6559 rootgilch /home/frappe/frappe-bench/e 156.0K 51.1M 52.6M 59.6M
5653 influxdb mysqld 42.8M 54.1M 54.1M 54.1M
10116 root frigate.review_segment_mana 165.4M 48.3M 56.8M 139.8M
9514 rootgilch /home/frappe/frappe-bench/e 1.5M 38.9M 57.1M 97.0M
9532 rootgilch /home/frappe/frappe-bench/e 1.5M 41.6M 59.8M 99.6M
6703 rootgilch /home/frappe/frappe-bench/e 84.0K 63.7M 67.0M 75.9M
2319581 root /usr/bin/python3 /usr/local 0 36.3M 68.3M 101.2M
1672514 root /usr/lib/ffmpeg/7.0/bin/ffm 0 72.9M 76.1M 89.5M
12243 root /usr/local/bin/python -c fr 33.8M 76.9M 78.4M 89.5M
1797 root /usr/bin/dockerd -H fd:// - 25.2M 83.0M 83.0M 85.0M
5271 rootgilch /opt/venv/bin/python3 /opt/ 483.6M 83.7M 83.7M 83.8M
1390605 root /usr/lib/ffmpeg/7.0/bin/ffm 0 82.4M 85.2M 98.5M
12242 root /usr/local/bin/python -c fr 30.9M 87.2M 88.8M 100.0M
2409033 root /usr/local/bin/python3.13 / 0 88.7M 90.5M 101.2M
12244 root /usr/local/bin/python -c fr 40.7M 89.8M 91.3M 102.3M
1659829 root /usr/lib/ffmpeg/7.0/bin/ffm 0 89.7M 92.6M 105.9M
12241 root /usr/local/bin/python -c fr 29.4M 95.5M 97.0M 108.1M
6548 influxdb mariadbd --character-set-se 22.8M 101.4M 101.4M 101.4M
1439 rabbitmq /usr/lib/erlang/erts-13.1.5 33.3M 78.8M 104.2M 134.1M
2808617 root node index.js 4.0K 106.2M 106.8M 108.8M
4447 unifi bin/mongod --dbpath /usr/li 44.9M 108.4M 108.5M 113.1M
10889 root frigate.process:cam_carport 197.1M 100.5M 109.0M 194.3M
1390609 root /usr/lib/ffmpeg/7.0/bin/ffm 0 113.3M 116.2M 129.2M
1672518 root /usr/lib/ffmpeg/7.0/bin/ffm 0 114.4M 117.1M 129.9M
1659833 root /usr/lib/ffmpeg/7.0/bin/ffm 0 116.2M 119.0M 132.0M
10102 root frigate.recording_manager 111.1M 140.4M 148.8M 231.4M
1171 prometheus /usr/bin/prometheus 9.3M 149.2M 149.2M 150.7M
10911 root frigate.process:cam_terasse 152.2M 170.1M 178.6M 263.9M
10896 root frigate.process:cam_einfahr 153.2M 172.2M 180.7M 265.9M
8137 rootgilch node-red 13.5M 231.8M 231.9M 232.4M
8155 grafana /usr/share/grafana/bin/graf 51.1M 233.0M 233.0M 233.0M
5419 root /usr/local/bin/python3 -m u 409.8M 234.5M 234.5M 234.5M
4244 mysql /usr/sbin/mariadbd 6.1M 284.7M 284.9M 291.3M
6525 systemd-timesync /opt/java/openjdk/bin/java 357.0M 305.0M 305.0M 305.0M
6008 root /jellyfin/jellyfin 70.7M 306.4M 325.1M 344.7M
10147 root frigate.embeddings_manager 244.6M 457.3M 465.7M 545.9M
4149 jellyfin /usr/bin/jellyfin --webdir= 165.3M 545.4M 547.1M 556.5M
6540 root /jellyfin/jellyfin 296.5M 610.6M 629.4M 649.2M
6188 root python3 -u -m frigate 147.4M 623.9M 633.1M 715.9M
8940 root python3 -m homeassistant -- 33.6M 635.0M 635.0M 635.0M
1578 unifi /usr/bin/java -Dfile.encodi 349.6M 692.2M 692.3M 696.5M
2319663 root /usr/bin/motion -n -c /etc/ 0 884.0M 886.0M 888.8M
1444715 influxdb /usr/bin/influxd -config /e 42.8M 1.6G 1.6G 1.6G
9859 rootgilch /usr/share/elasticsearch/jd 1.9G 3.3G 3.3G 3.3G
-------------------------------------------------------------------------------
496 22 7.2G 14.8G 15.5G 19.4G
Our connection is ok!
8.5.5